Grapples

V30 Compact Tractor Skeleton Rock Grapple

V30 Compact Tractor Skeleton Rock Grapple

Images

V30 Compact Tractor Skeleton Rock Grapple

Redesigned as a two-cylinder independent grapple. 25% lighter than previous version to haul more material.

  • Hybrid side plates keep rocks secure while still allowing handling material wider than the grapple possible.
  • Tight 3” tine spacing to pick rocks and leave dirt behind.
  • Every tine is constructed of one piece of 1/4” Grade 50 steel, from tip to top brace, to add rigidity.
  • Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging.
  • Fully gusseted tine tips for added strength.
  • NitroSteel® cylinder rod and Teflon® coated bushings on hinge.
  • Optional cylinder guards available.

Get my grapple guide

ProductV30 Compact Tractor Skeleton Rock Grapple
51
551
5/5
V30 compact rock bucket

V30 compact tractor rock bucket is a must for anyone’s compact tractor. Lots of uses, back drag driveway, tear stuff out, lift out fence post/slappings, dig, clear food plots, pick up fire wood in snow, etc. And pick up rock! You will use more then your factory bucket. Priced Right, quality and plenty heavy duty. I got the 54″ model for my Kubota.

WARNING

Specs
Compare
FAQ
Downloads
Options
MODEL SRGV48-CT SRGV54-CT SRGV60-CT SRGV66-CT SRGV72-CT
Overall Width (Inches) 47.9 54.3 60.9 67.5 74.1
Height: Overall / Bucket (Inches) 22.9 / 19.0
Depth: Overall / Inside (Inches) 29.0 / 23.5
Number of  Tines (With Sides) 15 17 19 21 23
Space Between Tines (Inches) 3.1
Tine Thickness (Inches) 0.25*
Side Plate Thickness (Inches) 0.375*
Grapple Jaw Opening (Inches) 28.7
Cylinder Bore / Stroke (Inches) 2.0 / 6.0
Cylinder Pins / Hinge Pins Diameter (Inches) 1.0
Approximate Weight (Pounds) 345 365 385 405 425
Recommended Loader Capacity Less than 1,500 pounds

*Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).

Coming Soon.

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

Virnig Frequently Asked Questions

HOW DO I PURCHASE VIRNIG SKID STEER ATTACHMENTS?

Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?

Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.

DOES VIRNIG BUILD MINI-SKID STEER ATTACHMENTS?

All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.

WHAT IS RECOMMENDED LOADER CAPACITY?

Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.

Go here to find skid steer capacity and specs for 2015 models.

Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.

WHAT IS THE SETUP TIME FOR A VIRNIG SKID STEER ATTACHMENT?

Most Virnig attachments are ready to work right off the pallet.

To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

Option: Cylinder Guards

View Similar Products