Two-cylinder independent grapple with open-sided design for hauling brush and logs. Open bottom allows dirt to fall through.
|Overall Width (Inches)||47.9||54.3||60.9||67.5||74.1|
|Height: Overall / Bucket (Inches)||22.9 / 19.0|
|Depth: Overall / Inside (Inches)||29.0 / 23.5|
|Number of Tines (With Sides)||8||9||10||11||12|
|Space Between Tines (Inches)||6.4|
|Tine Thickness (Inches)||0.25*|
|Side Plate Thickness (Inches)||0.375*|
|Grapple Jaw Opening (Inches)||28.7|
|Cylinder Bore / Stroke (Inches)||2.0 / 6.0|
|Cylinder Pins / Hinge Pins Diameter (Inches)||1.0|
|Approximate Weight (Pounds)||290||305||320||335||350|
|Recommended Loader Capacity||Less than 1,500 pounds|
*Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.
All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.
Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.
Go here to find skid steer capacity and specs for 2015 models.
Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.
Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.
Most Virnig attachments are ready to work right off the pallet.
To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.