No direct comparisons available.
Grade soil and gravel, prepare seedbeds and remove debris.
Available Widths 48″ & 60″
Choose from three mini skid mounts:
|Raking Width (Inches)
|Raking Width at Full Angle (Inches)
|Overall Width (Inches)
|Overall Height (Inches)
|Overall Depth (Inches)
|Drum Diameter (Inches)
|Number of Teeth
|Float Link Angle (Degrees)
|Max Rake Angle (Degrees)
|Recommended Flow Rate (GPM)
|10-18 Standard Flow Only
|Approximate Weight (Pounds)
|Recommended Loader Capacity
|Greater than 515 pounds
¹ASV® mount adds approximately 30 pounds and Bobcat® mount adds 25 pounds to model weight.
No direct comparisons available.
Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
At minimum, the Raking Width at Full Angle should be wider than your loader’s tracks. Please refer to the spec table to see which models work for your skid steer. Also note, the wider the unit the easier it will be to maintain grade.
Virnig Mini Power Rakes are designed with a flow tolerance of 10-18 GPM. All hydraulic motors used by Virnig Manufacturing are rated with zero overflow tolerance. Operating at a flow rate higher than 18 GPM can lead to premature failure and will void the motor warranty.
Direct drive systems have less replaceable wear parts and are more powerful than other drive systems. Direct drive systems are safer than mechanical systems because there are no belt or chain pinch points and no stored energy if hydraulic pressure is properly relieved.
There are three mini mounts to choose from:
Yes, the Power Rake is designed to operate in both directions. The operator should rotate the Power Rake drum in the opposite direction of the the loader.
Yes, replacement teeth are available for purchase. Note the original tooth and holder need to be cut off and the new tooth welded directly to the drum. This may take an extended amount of time. Also, teeth are a wear part and broken teeth are not considered a warranty item.
Alternatively, Virnig offers entire replacement drums, which may be a better option if many teeth need to be replaced.
The Power Rake is designed to be used on many soil types, but may have trouble in sticky/wet ground or weedy areas that are untended (the weeds will wrap around the drum). When working sod or compacted soil, multiple passes may be necessary to achieve desired effect.
Virnig offers several adapters, which are designed to work with different brands and models of skid loaders. If a brand or model is not supported, Virnig also offers a universal cab-mounted switchbox that operates off a 12V accessory port. Contact a local Virnig dealer or call Virnig at 800.648.2408 for more information about adapter options.
The Hydraulic Angle option uses an electrical adapter and a hydraulic valve/cylinder linkage which allows the angle control inside the cab. This means the operator doesn’t have to get off the platform or leave the cab until the job is complete, a valuable luxury in dusty environments or cold weather.
Virnig attachments are rated to provide maximum performance and protection against damage when paired with an appropriately sized loader. Here’s a checklist to get the right attachment for your loader.
Go here to find skid steer capacity and specs.
Contact a local Virnig dealer for the most accurate attachment specs, or call Virnig at 800.648.2408.
Virnig sells mini skid steer, compact tractor, and skid steer attachments through a network of independently owned dealers throughout the United States and Canada. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.
All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.
Most Virnig attachments are ready to work right off the pallet.
To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.
Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.