v20 Mini Skid Steer Low Profile Dirt Bucket

V20 Mini Skid Steer Low Profile Dirt Bucket - Featured 482px

Images

v20 Mini Skid Steer Low Profile Dirt Bucket

Product Category: Mini Skid Steer

Designed with a low back and extended bottom for cutting edge visibility. Available Widths 36″, 42″, 44″, 48″, 54″

  • LOW PROFILE DESIGN & EXTENDED BOTTOM FOR BETTER CUTTING EDGE VISIBILITY
  • 1/4” THICK SHELL & 3/16″SIDE PLATES
  • GRADING BEND FOR OPTIMAL REVERSE GRADING
  • 1/2″ x X 4″ WELD-ON EDGE

Choose from three mini skid mounts:

  • Mini Universal (all brands except Bobcat® and ASV®)
  • Bobcat® Mini
  • ASV® Mini
  • Note: None of the above are compatible with universal skid steer mount.
Download Spec Sheet (PDF)
Download Manual >>

No reviews have been submitted yet.

WARNING

Specs
Compare
FAQ
Downloads
Options
MODEL CLPB36 CLPB42 CLPB44 CLPB48 CLPB54
Width: Overall / Inside (Inches) 36.0 / 34.6 42.0 / 40.6 44.0 / 42.6 48.0 / 46.6 54.0 / 52.6
Overall Height, Toro® / Bobcat® / ASV® (Inches) 15.5 / 19.51 16.92 15.5
Depth: Overall / Inside (Inches) 30.2 / 26.8
Capacity: Struck / Heaped (Cubic Feet) 5.2 / 6.2 6.1 / 7.3 6.4 / 7.7 6.9 / 8.3 7.7 / 9.4
Bucket Back Angle (Degrees) 70
Shell Thickness (Inches) 0.25
Side Plate Thickness (Inches) 0.19
Approximate Weight (Pounds) 1953 2153 2253 2403 2603
Recommended Loader Capacity Less than 1650 pounds

1Overall height to the top of Bobcat® mount.
2Overall height to the top of ASV® step.
3Bobcat® mount adds approximately 10 pounds to model weight.

Spec Comparisons - Virnig Mini Skid Steer Buckets

Easily compare V20 Low Profile Dirt Buckets (CLPB), V20 High Capacity Dirt Buckets (HCDB) and V20 Snow / Light Material Buckets.
Name (Model)                    WidthDepthHeightStruck/Heaped Capacity (Cu Ft)Shell/Side Plate ThicknessBack AngleWeight (lbs)Rec. Loader Capacity (lbs)
V20 Mini Skid Steer Low Profile Dirt Bucket (CLPB36)36"30.2"15.5"5.2/6.20.25"/0.19"70°195< 1650
V20 Mini Skid Steer Low Profile Dirt Bucket (CLPB42)42"30.2"15.5"6.1/7.30.25"/0.19"70°215< 1650
V20 Mini Skid Steer Low Profile Dirt Bucket (CLPB44)44"30.2"15.5"6.4/7.70.25"/0.19"70°225< 1650
V20 Mini Skid Steer Low Profile Dirt Bucket (CLPB48)48"30.2"15.5"6.9/8.30.25"/0.19"70°240< 1650
V20 Mini Skid Steer Low Profile Dirt Bucket (CLPB54)54"30.2"15.5"7.7/9.40.25"/0.19"70°260< 1650
V20 Mini Skid Steer High Capacity Dirt Bucket (CHCB36)36"32.7"20.8"7.2/8.60.25"/0.19"70°235< 1650
V20 Mini Skid Steer High Capacity Dirt Bucket (CHCB42)42"32.7"20.8"8.4/10.10.25"/0.19"70°260< 1650
V20 Mini Skid Steer High Capacity Dirt Bucket (CHCB44)44"32.7"20.8"8.8/10.60.25"/0.19"70°270< 1650
V20 Mini Skid Steer High Capacity Dirt Bucket (CHCB48)48"32.7"20.8"9.6/11.50.25"/0.19"70°290< 1650
V20 Mini Skid Steer High Capacity Dirt Bucket (CHCB54)54"32.7"20.8"10.8/13.00.25"/0.19"70°315< 1650
V20 Mini Skid Steer Snow/Light Material Bucket (CLMB36)36"34.7"23.3"8.3/9.90.19"/0.19"70°215< 1650
V20 Mini Skid Steer Snow/Light Material Bucket (CLMB42)42"34.7"23.3"9.8/11.70.19"/0.19"70°235< 1650
V20 Mini Skid Steer Snow/Light Material Bucket (CLMB48)48"34.7"23.3"11.3/13.50.19"/0.19"70°255< 1650
V20 Mini Skid Steer Snow/Light Material Bucket (CLMB54)54"34.7"23.3"12.8/15.30.19"/0.19"70°275< 1650
V20 Mini Skid Steer Snow/Light Material Bucket (CLMB60)60"34.7"23.3"14.3/17.10.19"/0.19"70°295< 1650

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

V20 Mini Skid Steer Dirt Buckets

WHICH MINI SKID STEER MOUNTS ARE AVAILABLE?

There are three mini mounts to choose from:

  1. Toro®/Mini-Universal
  2. Bobcat®
  3. ASV®

Universal skid steer quick tach mount not available.

WHAT BUCKET WIDTH SHOULD I PURCHASE?

Typically, the bucket width should be wider than the tires or tracks of the loader. The attachment should also have a recommended loader capacity rating that matches or is lower than the loader lift capacity.

To prevent potential overloading issues, compare the loader’s lifting capacity and tipping weight to the weight of the attachment plus the estimated weight of a load. Different materials will change the estimated weight of a load. Use caution with dense items like rocks.

Contact your local dealer or call Virnig at 800-648-2408 for more information regarding proper width.

WHAT’S THE DIFFERENCE BETWEEN THE V20 LOW PROFILE DIRT BUCKET & V20 HIGH CAPACITY DIRT BUCKET?

The V20 High Capacity Dirt Bucket is 5” taller and a few inches deeper which results in 27% more capacity. The shortened height on the low profile dirt bucket allows the operator to see the cutting edge from the mini skid steer platform. For a side by side analysis, see the table under the “Compare” tab.

WHAT IS THIS BUCKET’S BACK ANGLE AND HOW DOES IT AFFECT PERFORMANCE?

Virnig V20 Mini Skid Steer Buckets have a 70 degree back angle. The bucket back angle affects the rollback and dump angles of a mini skid steer. If the angle on the back is too large the bucket may not roll back enough, and if there’s not enough back angle, the bucket may not dump properly. The higher or more vertical the back angle the more volume the bucket is able to hold.

Virnig Frequently Asked Questions

HOW DO I PURCHASE VIRNIG ATTACHMENTS?

Virnig sells skid steer, mini excavator, mini skid steer, compact tractor, and compact wheel loader attachments, as well as trailers, through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?

All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.

All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.

WHAT IS RECOMMENDED LOADER CAPACITY?

Virnig attachments are rated to provide maximum performance and protection against damage when paired with an appropriately sized loader.

Go here to find skid steer capacity and specs.

Contact a local Virnig dealer for the most accurate attachment specs, or call Virnig at 800.648.2408.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.

WHY DOES VIRNIG MANUFACTURING USE NITROSTEEL® CYLINDER RODS?

NitroSteel® rods are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit, causing seals to be damaged or destroyed; resulting in downtime and extensive, costly repairs.

NitroSteel® rods perform better, increase the service life of a cylinder, and are the most cost-effective choice.

WHAT IS THE SETUP TIME FOR A VIRNIG ATTACHMENT?

Most Virnig attachments are ready to work right off the pallet.

There may be specific scenarios in which additional setup time will be required. To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

BOLT-ON EDGE INSTALLED

  • Extends bucket edge life.
  • Reversible 1/2” x 6” bolt-on wear edge with 1/2” plow bolt holes spaced 6” on center.
  • Available on all Virnig mini skid buckets except skeleton rock, unless noted.

WELD-ON TEETH // FACTORY INSTALLED

  • Replaceable Series 23 cast teeth with cast shank welded directly to the bucket edge.
  • Excellent for breaking up compacted soil.
  • Available on Virnig Dirt Buckets and Multi-Purpose Buckets only. Not available for V40 Dirt Buckets.