| MODEL |
CHCB36 |
CHCB42 |
CHCB44 |
CHCB48 |
CHCB54 |
| Width: Overall / Inside (Inches) |
36.0 / 34.6 |
42.0 / 40.6 |
44.0 / 42.6 |
48.0 / 46.6 |
54.0 / 52.6 |
| Overall Height (Inches) |
20.8 |
| Depth: Overall / Inside (Inches) |
32.7 / 29.3 |
| Capacity: Struck / Heaped (Cubic Feet) |
7.2 / 8.6 |
8.4 / 10.1 |
8.8 / 10.6 |
9.6 / 11.5 |
10.8 / 13.0 |
| Bucket Back Angle (Degrees) |
70 |
| Shell Thickness (Inches) |
0.25 |
| Side Plate Thickness (Inches) |
0.19 |
| Approximate Weight (Pounds) |
2351 |
2601 |
2701 |
2901 |
3151 |
| Recommended Loader Capacity |
Less than 1650 pounds |
¹Bobcat® mount adds approximately 5 pounds to model weight.
Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
V20 Mini Skid Steer Dirt Buckets
WHAT BUCKET WIDTH SHOULD I PURCHASE?
Typically, the bucket width should be wider than the tires or tracks of the loader. The attachment should also have a recommended loader capacity rating that matches or is lower than the loader lift capacity.
To prevent potential overloading issues, compare the loader’s lifting capacity and tipping weight to the weight of the attachment plus the estimated weight of a load. Different materials will change the estimated weight of a load. Use caution with dense items like rocks.
Contact your local dealer or Virnig at 800-648-2408 for more information regarding proper width.
WHICH MINI SKID STEER MOUNTS ARE AVAILABLE?
The V20 Mini Skid Steer Bucket has two mini mounts to choose from:
• Toro®/Mini-Universal
• Bobcat®
• ASV® mini mount and universal skid steer quick tach mount not available.
The V20 Mini Skid Steer Bucket has three mini mounts to choose from:
• Toro®/Mini-Universal
• Bobcat®
• ASV®
• Universal skid steer quick tach mount not available.
WHAT’S THE DIFFERENCE BETWEEN THE V20 LOW PROFILE DIRT BUCKET & V20 HIGH CAPACITY DIRT BUCKET?
The V20 High Capacity Dirt Bucket is 5” taller and a few inches deeper which results in 27% more capacity. The shortened height on the low profile dirt bucket allows the operator to see the cutting edge from the mini skid steer platform. For a side by side analysis, see the table under the “Compare” tab.
WHAT IS THIS BUCKET’S BACK ANGLE AND HOW DOES IT AFFECT PERFORMANCE?
Virnig V20 Mini Skid Steer Buckets have a 70 degree back angle. The bucket back angle affects the rollback and dump angles of a mini skid steer. If the angle on the back is too large the bucket may not roll back enough, and if there’s not enough back angle, the bucket may not dump properly. The higher or more vertical the back angle the more volume the bucket is able to hold.
Virnig Frequently Asked Questions
HOW DO I PURCHASE VIRNIG ATTACHMENTS?
Virnig sells mini skid steer, compact tractor, and skid steer attachments through a network of independently owned dealers throughout the United States and Canada. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?
All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.
All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.
WHAT IS THE SETUP TIME FOR A VIRNIG ATTACHMENT?
Most Virnig attachments are ready to work right off the pallet.
To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
HOW QUICKLY CAN I GET REPLACEMENT PARTS?
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
WHAT WARRANTY DOES VIRNIG OFFER?
All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.
WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?
Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.
