No direct comparisons available. See similar attachments below.
Bi-directional, direct drive tiller attachment with a bearing supported shaft and replaceable tines.
MODEL | TLR54 | TLR72 |
Working Width (Inches) | 54.0 | 72.0 |
Overall Width (Inches) | 70.5 | 88.5 |
Loader Width Coverage, Outside Tire (Inches) | 68.0 | 80.0 |
Overall Height (Inches) | 28.0 | |
Overall Depth (Inches) | 32.0 | |
Tilling Depth (Inches) | 6.0 | |
Working Offset (Inches) | 7.0* | 4.0* |
Recommended Flow Rate (GPM) | 15-25 | |
Drum Diameter (Inches) | 22.0 | |
Number of Tines | 28 | 36 |
Approximate Weight (Pounds) | 900 | 1050 |
Recommended Loader Capacity | Greater than 1300 pounds |
*Distance between the center of the quick-tach plate and center of the working width.
No direct comparisons available. See similar attachments below.
Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
For efficient operation, purchase a skid steer tiller with a working width that is wider than the tires or tracks of your loader, factoring in tiller working off-set. See the spec table for Loader Width Coverage.
Loader capacity should also be considered. Selecting a skid steer attachment that is too wide will add weight, volume, and surface area, all factors that could affect performance.
Direct drive systems have less replaceable wear parts and are more powerful than other drive systems. Direct drive systems are safer than mechanical systems because there are no belt or chain pinch points and no stored energy if hydraulic pressure is properly relieved.
It is recommended that the tiller tines travel in the same direction as the skid steer loader.
The Virnig Skid Steer Tiller is designed with a flow tolerance of 15-25 GPM. All hydraulic motors used by Virnig Manufacturing are rated with zero overflow tolerance. Operating at a higher flow rate can lead to premature failure and will void the motor warranty.
Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
Please contact a local Virnig dealer to obtain pricing information.
For Virnig’s suggested retail price, fill out an online Request a Quote form.
Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.
All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.
Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.
Go here to find skid steer capacity and specs for 2015 models.
Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.
Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.
Most Virnig attachments are ready to work right off the pallet.
To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.
None Available.