v60 Snow / Light Material Bucket

V60 Snow Light Material Bucket - Featured 482px

Images

v60 Snow / Light Material Bucket

Product Category: Skid Steer

The heaviest and toughest light material bucket with the most capacity.

  • EXTRA BRACE PLATE INSIDE BUCKET FOR ADDED STRENGTH
  • 1/4” SHELL & SIDE PLATES
  • 1/2” VERTICAL BRACES INSIDE BUCKET
  • 3/8” SIDE EDGES & GUSSETS
  • WINDOWS FOR BETTER OPERATOR VISIBILITY. AVAILABLE WITH SOLID BACK
  • 3/4″ x 6″ WELD-ON EDGE

READ THE ULTIMATE GUIDE TO SKID STEER BUCKET ATTACHMENTS

READ THE ULTIMATE GUIDE TO SKID STEER SNOW REMOVAL ATTACHMENTS

BUCKET LOAD CALCULATOR

No reviews have been submitted yet.

WARNING

Specs
Compare
FAQ
Downloads
Options
MODELS SBHV78 SBHV84 SBHV96 SBHV101
Width: Overall / Inside (Inches) 79.5 / 77.3 85.5 / 83.3 97.5 / 95.3 101.5 / 99.3
Overall Height (Inches) 40.5
Depth: Overall / Inside (Inches) 47.6 / 43.0
Window Height (Inches) 12.0
Capacity: Struck / Heaped (Cubic Feet) 40.1 / 48.1 43.2 / 51.8 49.4 / 59.3 52.2 / 62.6
Bucket Back Angle (Degrees) 66
Shell Thickness (Inches) 0.25
Side Plate Thickness (Inches) 0.25
Structural Wear Bars Under Bucket (1/2″ x 4″) 5 5 5 5
Approximate Weight (Pounds) 1045 1095 1195 1225
Recommended Loader Capacity Greater than 2400 pounds

Spec Comparisons - Virnig Snow Buckets

Easily compare V40 (SLHV), V50 (MSHV), V60 Snow/Light Material Buckets (SBHV), and V60 Utility Buckets (HUHV).

Name (Model)          Overall Bucket WidthBucket DepthBucket HeightStruck/Heaped Capacity (Cubic Feet)Shell/Side Plate ThicknessVertical Brace ThicknessWear Bars Under BucketWindowsWeight (lbs.)Recommended Loader Capacity (lbs.)
V40 Snow / Material Bucket (SLHV60)61.5"37.6"26.6"18.6/22.30.19"/0.19"None2None495< 2,400
V40 Snow / Material Bucket (SLHV66)67.5"37.6"26.6"20.4/24.50.19"/0.19"None2None525< 2,400
V40 Snow / Material Bucket (SLHV72)73.5"37.6"26.6"22.2/26.60.19"/0.19"None2None555< 2,400
V40 Snow / Material Bucket (SLHV78)79.5"37.6"26.6"24.0/28.80.19"/0.19"None3None605< 2,400
V40 Snow / Material Bucket (SLHV84)85.5"37.6"26.6"25.8/31.00.19"/0.19"None3None635< 2,400
V40 Snow / Material Bucket (SLHV96)97.5"37.6"26.6"29.4/35.30.19"/0.19"0.375"4None745< 2,400
V50 Snow / Material Bucket (MSHV72)73.5"40.6"29.8"26.6/31.90.18"/0.25"0.375"3Yes655> 1,800
V50 Snow / Material Bucket (MSHV78)79.5"40.6"29.8"28.8/34.60.18"/0.25"0.375"4Yes730> 1,800
V50 Snow / Material Bucket (MSHV84)85.5"40.6"29.8"31.0/37.20.18"/0.25"0.375"4Yes760> 1,800
V50 Snow / Material Bucket (MSHV96)97.5"40.6"29.8"35.5/42.60.18"/0.25"0.375"4Yes825> 1,800
V50 Snow / Material Bucket (MSHV101)101.5"40.6"29.8"37.0/44.50.18"/0.25"0.375"4Yes850> 1,800
V60 Snow / Material Bucket (SBHV78)79.5"45.5"40.5"40.1/48.10.25"/0.25"0.5"5Yes1045> 2,400
V60 Snow / Material Bucket (SBHV84)85.5"45.5"40.5"43.2/51.80.25"/0.25"0.5"5Yes1095> 2,400
V60 Snow / Material Bucket (SBHV96)97.5"45.5"40.5"49.4/59.30.25"/0.25"0.5"5Yes1195> 2,400
V60 Snow / Material Bucket (SBHV101)101.5"45.5"40.5"52.2/62.60.25"/0.25"0.5"5Yes1225> 2,400
V60 Utility Bucket (HUHV72)73.5"37.6"24.9"19.2/23.00.25"/0.25"None4None720> 2,400
V60 Utility Bucket (HUHV78)79.5"37.6"24.9"20.9/25.10.25"/0.25"None5None775> 2,400
V60 Utility Bucket (HUHV84)85.5"37.6"24.9"22.6/27.10.25"/0.25"None5None815> 2,400
V60 Utility Bucket (HUHV90)91.5"37.6"24.9"24.3/29.20.25"/0.25"None5None855> 2,400
V60 Utility Bucket (HUHV96)97.5"37.6"24.9"26.0/31.20.25"/0.25"None5None890> 2,400

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

Snow/Light Material Bucket Frequently Asked Questions

WHAT IS THE DIFFERENCE BETWEEN THE V40, V50, AND V60 SNOW/LIGHT MATERIAL BUCKET?

V40, V50, and V60 series Snow/Light Material Buckets are designed to serve different purposes and machine sizes. Naturally, some materials and features will be different depending on the model. For a side by side analysis, see the table under the “Compare” tab.

WHAT BUCKET WIDTH SHOULD I PURCHASE?

Typically, the bucket width should be wider than the tires or tracks of the loader. The attachment should also have a recommended loader capacity rating that matches or is lower than the loader lift capacity.

To prevent potential overloading issues, compare the loader’s lifting capacity and tipping weight to the weight of the attachment plus the estimated weight of a load. Different materials will change the estimated weight of a load. Use caution with dense items like rocks.

Contact your local dealer or call Virnig at 800-648-2408 for more information regarding proper width.

CAN I GET A SNOW BUCKET WITHOUT VISIBILITY WINDOWS?

Yes, Virnig V20, V50, and V60 Snow/Light Material Buckets can be ordered without windows.

Note: V40 Snow/Light Material Buckets do not have visibility windows.

WHAT EDGE OPTIONS ARE AVAILABLE FOR THE V40 SNOW/LIGHT MATERIAL BUCKET?

Virnig Manufacturing recommends using only standard Bolt-On Edges with the Snow/Light Material Bucket, but Serrated Edges can be installed if desired.

ARE ANY OF THESE BUCKETS CONSIDERED A “1-YARD” BUCKET?

The 72” V50 Snow Bucket (MSHV72) measures 26.6 cubic feet, or roughly 1 cubic yard, struck capacity.

WHAT MATERIALS ARE VIRNIG SNOW/LIGHT MATERIAL BUCKETS SUITED FOR?

The high capacity design makes them ideal for moving snow and granular materials such as mulch, grain, wood shavings, and fertilizer (See next question).

CAN I USE A SNOW/LIGHT MATERIAL BUCKET TO MOVE FERTILIZER?

Yes, the V50 and V60 series buckets can be ordered without windows and the bucket should be ordered with full welds instead of stitch welds to prevent corrosion and leakage. These options must be specified when ordering.

CAN I GET A HEAVIER VERSION OF THE V40 BUCKET BUILT?

The V60 Utility Bucket is dimensionally similar to the V40 Snow/Light material bucket, but is built heavier. With more gusseting, wear bars, weld, and steel thickness, the V60 Utility Bucket is a suitable heavy duty option for customers.

WHAT IS THIS BUCKET’S BACK ANGLE AND HOW DOES IT AFFECT PERFORMANCE?

This Virnig Bucket has a 66 degree back angle. The bucket back angle affects the rollback and dump angles of a skid steer. If the angle on the back is too large the bucket may not roll back enough, and if there’s not enough back angle, the bucket may not dump properly. The higher or more vertical the back angle the more volume the bucket is able to hold.

Virnig Frequently Asked Questions

HOW DO I PURCHASE VIRNIG ATTACHMENTS?

Virnig sells skid steer, mini excavator, mini skid steer, compact tractor, and compact wheel loader attachments, as well as trailers, through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?

All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.

All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.

WHAT IS RECOMMENDED LOADER CAPACITY?

Virnig attachments are rated to provide maximum performance and protection against damage when paired with an appropriately sized loader.

Go here to find skid steer capacity and specs.

Contact a local Virnig dealer for the most accurate attachment specs, or call Virnig at 800.648.2408.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.

WHY DOES VIRNIG MANUFACTURING USE NITROSTEEL® CYLINDER RODS?

NitroSteel® rods are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit, causing seals to be damaged or destroyed; resulting in downtime and extensive, costly repairs.

NitroSteel® rods perform better, increase the service life of a cylinder, and are the most cost-effective choice.

WHAT IS THE SETUP TIME FOR A VIRNIG ATTACHMENT?

Most Virnig attachments are ready to work right off the pallet.

There may be specific scenarios in which additional setup time will be required. To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

Side Cutters

  • Exclusive, reversible design.
  • Improves performance in hard, compacted soils.
  • Cast steel lengthens life of bucket sides.
  • Not compatible with Toothbars.
bucket side cutter option virnig mfg

BOLT-ON EDGE INSTALLED

  • Extends bucket edge life.
  • Reversible 5/8” x 8” bolt-on wear edge with 5/8” plow bolt holes spaced 6” on center.
  • Available on all Virnig Buckets except skeleton style, unless noted.

SERRATED BOLT-ON EDGE INSTALLED

  • Excellent alternative to toothbar for chiseling and breaking up compacted soil.
  • 3/4″ x 8″ single bevel, serrated edge with 5/8″ plow bolt holes spaced 6″ on center.
  • Available on all Virnig Buckets except skeleton style, unless noted.