Virnig Land Levelers are designed to level dry, loose dirt. Hydraulic Scarifiers may require additional cleaning with wet or sticky ground.

Virnig uses a replaceable and reversible bolt-on edge to minimize operator downtime and provide more value.

Many other levelers use smaller wear edges that are welded directly to the frame. Replacing weld-on edges is time consuming. It must be torched off and new one will have to be welded back on.

When an edge is wore out on the Virnig Land Leveler, simply undo the bolts and reverse it or install a new edge. These edges are a user-friendly choice that require minimal repair time.

The Virnig Land Leveler has a unique, rigid frame design which gives it a long overall life. The two steel frame supports that run from the back to the front give it a lot of structural integrity. The overall weight is 200-400 pounds heavier than most of the competition. The cutting edge on the Land Leveler 78-Land Leveler 90 is ⅝” thick x 8” wide. Most other cutting edges are ½” x 6”. This additional steel means less replacement cost and longer overall wear life.

The Hydraulic Scarifier allows the operator to quickly break up hard-packed soil. The teeth dig up to 6” deep and allow the dirt to be graded more easily.

The scarifier uses a disconnected ram to push a steel sleeve, which pivots the shanks of the scarifier into the upward stored position. When the operator is ready to use the scarifier, the ram pulls back, allowing the toothbar to fall freely.

Yes, It is removable for repair or cleaning. However, it is not necessary to remove the scarifier when not in use.

Virnig attachments are rated to provide maximum performance and protection against damage when paired with an appropriately sized loader. Here’s a checklist to get the right attachment for your loader.

Go here to find skid steer capacity and specs.

Contact a local Virnig dealer for the most accurate attachment specs, or call Virnig at 800.648.2408.

Virnig sells mini skid steer, compact tractor, and skid steer attachments through a network of independently owned dealers throughout the United States and Canada. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.

All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.

Most Virnig attachments are ready to work right off the pallet.

To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.

Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.