Agriculture

Rubber Manure Scraper

RUBBER MANURE SCRAPER

Rubber Manure Scraper

Durable construction and replaceable rubber make for a long-lasting attachment.

  • 1 ½” x 10” reversible, replaceable rubber edges allow 6” of total wear.
  • Deep-angled design and one-piece lower rubber eliminates spillage.
  • Upper pull back cleans material in tight spaces.
  • Has been effectively used as a snow pusher for small skid steer loaders and compact tractors.
No matching reviews found.

WARNING

Specs
Compare
FAQ
Downloads
Options
MODELSMR72SMR84SMR96
Overall Width (Inches)72.884.896.8
Upper Rubber Width (Inches)72.084.096.0
Overall Height (Inches)25.0
Overall Depth (Inches)52.2
Inner Depth (Inches)35.3
Approximate Weight (Pounds)670725785

No direct comparisons available. See similar attachments below.

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

Rubber Manure Scraper Frequently Asked Questions

WHAT WIDTH SHOULD I PURCHASE?

The bucket width should be wider than the tires or tracks of your skid loader.

WILL THE RUBBER MANURE SCRAPER WORK WITH ALL TYPES OF MANURE?

It will work with most types of manure, but may have trouble with frozen or compacted manure. It is specifically designed to push wet manure across hard surfaces.

CAN THE RUBBER MANURE SCRAPER BE USED AS A SNOW PUSHER?

Yes, the Manure Scraper can be used to push snow across relatively level surfaces. It won’t be as effective as a V60 Snow Pusher because it will not float or oscillate over surfaces.

WHY DOES VIRNIG USE A RUBBER EDGE INSTEAD OF STEEL OR POLY EDGES?

Rubber edges work great on uneven surfaces for wet manure and will not damage or dig into the ground as easily. Rubber also acts like a squeegee for loose, wet manure and limits spillage.

HOW DURABLE IS THE RUBBER EDGE?

The Manure Scraper rubber edge is 1.5” thick and 10” tall allowing for 6” of total wear. Virnig uses a Durablade style rubber which gives great wear resistance, but is also soft enough to hold material with minimal spillage.

Virnig Frequently Asked Questions

HOW DO I PURCHASE VIRNIG SKID STEER ATTACHMENTS?

Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?

Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.

DOES VIRNIG BUILD MINI-SKID STEER ATTACHMENTS?

All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.

WHAT IS RECOMMENDED LOADER CAPACITY?

Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.

Go here to find skid steer capacity and specs for 2015 models.

Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.

WHAT IS THE SETUP TIME FOR A VIRNIG SKID STEER ATTACHMENT?

Most Virnig attachments are ready to work right off the pallet.

To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

None Available. 

View Similar Products