This is a specialized attachment, no direct comparisons available.
Two-cylinder independent clamp arms open to near vertical for handling palleted material.
MODEL | PPFG248 | PPFG260 |
Overall Width (Inches) | 70.8 | |
Overall Height: Open / Closed (Inches) | 81.4 / 40.4 | |
Overall Depth (Inches) | 56.0 | 67.5 |
Grapple Arm Width (Inches) | 8.3 | |
Tine Space: Min / Max (Inches) | 8.9 / 49.1 | |
Tine: Length / Width / Thickness (Inches) | 48.0 / 4.0 / 1.75 | 60.0 / 4.0 / 1.5 |
Lift Capacity (Pounds) | 6200 | 5500 |
Approximate Weight (Pounds) | 950 | 965 |
Recommended Loader Capacity | Greater than 1500 pounds |
This is a specialized attachment, no direct comparisons available.
Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
The best method for securing a load is first ensure that it is centered on the grapple tines. One layer of pipes is recommended per load to distribute arm force properly. After slowly lowering the arms at an even pace and securing both sides of the load, the operator can apply full clamping force.
The grapple arms work independently. Depending on plumbing configuration, each arm can open and close at different intervals, so caution must be taken when clamping the load. Always close the grapple arms at a measured pace to avoid damaging or losing the load.
Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.
The hoses, couplers*, cylinders, and fittings are included with all Virnig skid steer grapples.
*Couplers not included with Compact Tractor grapples.
Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
Please contact a local Virnig dealer to obtain pricing information.
For Virnig’s suggested retail price, fill out an online Request a Quote form.
Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.
All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.
Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.
Go here to find skid steer capacity and specs for 2015 models.
Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.
Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.
Most Virnig attachments are ready to work right off the pallet.
To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.
None Available.