v50 Low Profile Dirt Bucket

Images

v50 Low Profile Dirt Bucket

Product Category: Skid Steer

Heavily built bucket with a low back and extended bottom for cutting edge visibility.

  • CUTTING EDGE VISIBLE FROM INSIDE CAB
  • GRADING BEND FOR OPTIMAL REVERSE GRADING & CURVED INSIDE FOR EASIER MATERIAL CLEANOUT
  • 3/4″ x 6″ WELD-ON EDGE
  • ADDITIONAL GUSSETING ON BACK OF BUCKET
  • 1/2″ x 4″ WEAR BARS PROTECT THE BUCKET BOTTOM

Read The Ultimate Guide to Skid Steer Bucket Attachments

BUCKET LOAD CALCULATOR 

Download Spec Sheet (PDF)
Download Manual >>
Review for V50 Low Profile Dirt Bucket
Awesome Bucket

Purchased a used Virnig bucket and we now use it instead of our OEM bucket. It’s more robust, has more welds and seems all around better than the other one we have. Keep up the great work!

WARNING

Specs
Compare
FAQ
Downloads
Options
MODELS DHV60EX-GB DHV66EX-GB DHV72EX-GB DHV78EX-GB DHV84EX-GB
Width: Overall / Inside (Inches) 61.5 / 59.3 67.5 / 65.3 73.5 / 71.3 79.5 / 77.3 85.5 / 83.3
Overall Height (Inches) 20.5
Depth: Overall / Inside (Inches) 37.0 / 32.5
Capacity: Struck / Heaped (Cubic Feet) 11.9 / 14.3 13.1 / 15.7 14.4 / 17.3 15.7 / 18.8 17.0 / 20.4
Bucket Back Angle (Degrees) 66
Shell Thickness (Inches) 0.19
Side Plate Thickness (Inches) 0.25
Structural Wear Bars Under Bucket (1/2″ x 4″) 2 2 2 3 3
Approximate Weight (Pounds) 475 505 535 585 615
Recommended Loader Capacity Less than 2400 pounds

 

Spec Comparisons - Virnig Buckets

Easily compare V40 Dirt Buckets (EDV), V50 Dirt Buckets - Standard (DHVEX), V60 Dirt Buckets - Standard (HDHV), V60 High Capacity Dirt Buckets (HCDB), V50 Utility Buckets (UHV), and V60 Utility Buckets (HUHV).

Name (Model)          WidthDepthHeightStruck/Heaped Capacity (Cu Ft)Shell/Side Plate ThicknessWear BarsEdge Options AvailableBucket Options AvailableRec. Loader Capacity (lbs)
V40 Dirt Bucket (EDV60 )61.5"32.4"20.0"11.6/13.90.19"/0.19"22None< 2,400
V40 Dirt Bucket (EDV66)67.5"32.4"20.0"12.8/15.40.19"/0.19"22None< 2,400
V40 Dirt Bucket (EDV72)73.5"32.4"20.0"14.1/15.40.19"/0.19"22None< 2,400
V40 Dirt Bucket (EDV78)79.5"32.4"20.0"15.4/18.850.19"/0.19"32None< 2,400
V40 Dirt Bucket (EDV84)85.5"32.4"20.0"16.7/20.00.19"/0.19"32None< 2,400
V50 Dirt Bucket (DHV60EX-GB)61.5"33.0"20.5"11.9/14.30.19"/0.25"25None< 2,400
V50 Dirt Bucket (DHV66EX-GB)67.5"33.0"20.5"13.1/15.70.19"/0.25"25None< 2,400
V50 Dirt Bucket (DHV72EX-GB)73.5"33.0"20.5"14.4/17.30.19"/0.25"25None< 2,400
V50 Dirt Bucket (DHV78EX-GB)79.5"33.0"20.5"15.7/18.80.19"/0.25"35None< 2,400
V50 Dirt Bucket (DHV84EX-GB)85.5"33.0"20.5"17.0/20.40.19"/0.25"35None< 2,400
V60 Dirt Bucket (HDHV72-GB)73.5"37"20.5"14.2/17.00.25"/0.25"43None> 2,400
V60 Dirt Bucket (HDHV78-GB)79.5"37"20.5"15.4/18.50.25"/0.25"53None> 2,400
V60 Dirt Bucket (HDHV84-GB)85.5"37"20.5"16.6/20.00.25"/0.25"53None> 2,400
V60 Dirt Bucket (HDHV90-GB)91.5"37"20.5"17.8/21.40.25"/0.25"53None> 2,400
V60 High Capacity Dirt Bucket (HCDB72)73.5"40"24.1"19.5 / 23.40.25"/0.25"53None> 2,400
V60 High Capacity Dirt Bucket (HCDB78)79.540"24.1"21.1 / 25.30.25"/0.25"53None> 2,400
V60 High Capacity Dirt Bucket (HCDB84)85.540"24.1"22.7 / 27.20.25"/0.25"53None> 2,400
V60 High Capacity Dirt Bucket (HCDB90)91.540"24.1"24.3 / 29.20.25"/0.25"53None> 2,400
V50 Utility Bucket (UHV60)61.5"35.6"24.0"14.4/17.30.19"/0.25"22None< 2,400
V50 Utility Bucket (UHV66)67.5"35.6"24.0"16.0/19.20.19"/0.25"22None< 2,400
V50 Utility Bucket (UHV72)73.5"35.6"24.0"17.6/21.10.25"/0.25"22None< 2,400
V50 Utility Bucket (UHV78)79.5"35.6"24.0"19.2/23.00.25"/0.25"32None< 2,400
V50 Utility Bucket (UHV84)85.5"35.6"24.0"20.8/24.90.25"/0.25"32None< 2,400
V60 Utility Bucket (HUHV72)73.5"37.6"24.9"19.2/23.00.25"/0.25"42None> 2,400
V60 Utility Bucket (HUHV78)79.5"37.6"24.9"20.9/25.10.25"/0.25"52None> 2,400
V60 Utility Bucket (HUHV84)85.5"37.6"24.9"22.6/27.10.25"/0.25"52None> 2,400
V60 Utility Bucket (HUHV90)91.5"37.6"24.9"24.3/29.20.25"/0.25"52None> 2,400
V60 Utility Bucket (HUHV96)97.5"37.6"24.9"26.0/31.20.25"/0.25"52None> 2,400

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

V50 LOW PROFILE DIRT BUCKET FREQUENTLY ASKED QUESTIONS

WHAT BUCKET WIDTH SHOULD I PURCHASE?

Typically, the bucket width should be wider than the tires or tracks of the loader. The attachment should also have a recommended loader capacity rating that matches or is lower than the loader lift capacity.

To prevent potential overloading issues, compare the loader’s lifting capacity and tipping weight to the weight of the attachment plus the estimated weight of a load. Different materials will change the estimated weight of a load. Use caution with dense items like rocks.

Contact your local dealer or Virnig at 800-648-2408 for more information regarding proper width.

WHAT IS THE DIFFERENCE BETWEEN THE V40 AND V50 DIRT BUCKET?

V40 Dirt Bucket’s are designed to deliver the quality that Virnig V50 Dirt Bucket’s are known for while also providing a price that is competitive. Naturally, some materials and features will be different. For a side by side analysis, see the table under the “Compare” tab.

WHAT IS THIS BUCKET’S BACK ANGLE AND HOW DOES IT AFFECT PERFORMANCE?

This Virnig Bucket has a 66 degree back angle. The bucket back angle affects the rollback and dump angles of a skid steer. If the angle on the back is too large the bucket may not roll back enough, and if there’s not enough back angle, the bucket may not dump properly. The higher or more vertical the back angle the more volume the bucket is able to hold.

WHAT EDGE OPTIONS ARE AVAILABLE FOR THIS VIRNIG BUCKET?

This Virnig Bucket can be paired with a Bolt-On Edge, Serrated Edge, Toothbar Over Weld-On Edge, Toothbar Over Weld-On and Bolt-On Edge, or Weld-On Teeth.

WHAT IS THE BENEFIT OF THE GRADING BEND?

The Grading Bend, located at the heel of the bucket, allows better and easier grading in reverse compared to a standard profile skid steer bucket. Additionally the Grading Bend comes with a Rolled Inside for easier material cleanout.

Virnig Frequently Asked Questions

What is Recommended Loader Capacity?

Virnig attachments are rated to provide maximum performance and protection against damage when paired with an appropriately sized loader. Here’s a checklist to get the right attachment for your loader.

Go here to find skid steer capacity and specs.

Contact a local Virnig dealer for the most accurate attachment specs, or call Virnig at 800.648.2408.

How Do I Purchase Virnig Attachments?

Virnig sells mini skid steer, compact tractor, and skid steer attachments through a network of independently owned dealers throughout the United States and Canada. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

What Type of Attachment Interface/Hookup Does Virnig Use?

All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.

All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.

What is the Setup Time for a Virnig Attachment?

Most Virnig attachments are ready to work right off the pallet.

To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

Side Cutters

  • Reversible – only one in the industry.
  • Improves performance in hard, compacted soils.
  • Cast steel lengthens life of bucket sides.
  • Not compatible with Toothbars.
bucket side cutter option virnig mfg

BOLT-ON EDGE INSTALLED

  • Extends bucket edge life.
  • Reversible 5/8” x 8” bolt-on wear edge with 5/8” plow bolt holes spaced 6” on center.
  • Available on all Virnig Buckets except skeleton style, unless noted.

SERRATED BOLT-ON EDGE INSTALLED

  • Excellent alternative to toothbar for chiseling and breaking up compacted soil.
  • 3/4″ x 8″ single bevel, serrated edge with 5/8″ plow bolt holes spaced 6″ on center.
  • Available on all Virnig Buckets except skeleton style, unless noted.

WELD-ON TEETH // FACTORY INSTALLED

  • Replaceable Series 23 cast teeth with cast shank welded directly to the bucket edge.
  • Excellent for breaking up compacted soil.
  • Available on Virnig Dirt Buckets and Multi-Purpose Buckets only. Not available for V40 Dirt Buckets.

View Similar Products