At minimum, the Blade Width at Full Angle should be wider than your loader’s tracks or tires. Please refer to the spec table to see which models work for your skid steer.

The tension is set by the springs and is non-adjustable. The edge cannot be locked out because if an object is hit hard enough the edge is designed to trip. Locking out the trip edge could damage the attachment, the skid steer, or worse the operator. Locking out the trip edge should never be done.

Because trip edge integrity is determined by down pressure, it is difficult to properly use your plow on unpacked dirt or gravel without destroying the surface. By using the machine tilt and arms to keep the blade slightly above the ground, you will build a base of hard packed snow and ice. Once the hard pack is set, down pressure may be applied. This is the most effective method to keep the edge from tripping.

When plowing on asphalt or concrete, raise or remove the plow shoes so the cutting edge will scrape as close to the surface as possible.

The knuckle plate is connected to the quick tach plate by a large pin that gives the Angle Snow Blade +/- 4 degrees of rotational oscillation. This system allows the Angle Snow Blade to travel across uneven areas and still maintain solid contact with the ground.

Virnig generally uses heavier cylinders, thicker moldboard steel, larger and thicker cutting edges, and they’re built with more structural support.

No. Virnig recommends that you should never use this skid steer attachment on anything other than snow.

Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.

Virnig attachments are rated to provide maximum performance and protection against damage when paired with an appropriately sized loader. Here’s a checklist to get the right attachment for your loader.

Go here to find skid steer capacity and specs.

Contact a local Virnig dealer for the most accurate attachment specs, or call Virnig at 800.648.2408.

Virnig sells mini skid steer, compact tractor, and skid steer attachments through a network of independently owned dealers throughout the United States and Canada. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.

All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.

Most Virnig attachments are ready to work right off the pallet.

To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.

Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.