Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
V60 Utility Bucket Frequently Asked Questions
WHAT WIDTH SHOULD I PURCHASE?
The attachment width should be wider than the tires or tracks of the skid loader. The attachment should also have a recommended loader capacity rating that matches or is lower than the loader lift capacity.
To prevent potential overloading issues, compare the loader’s lifting capacity and tipping weight to the weight of the attachment plus the estimated weight of a load. Different materials will change the estimated weight of a load.
Contact your local dealer or Virnig at 800-648-2408 for more information regarding proper width.
WHAT EDGE OPTIONS ARE AVAILABLE FOR THE V60 UTILITY BUCKET?
Bolt-On Edges and Serrated Bolt-On Edges are available installed from the factory. Weld-On Teeth and Tooth Bars are useable, though these options cannot be installed from the factory. A weld-on edge with no holes is required to install the Weld-On Tooth option. This must be specified when ordering.
WHAT IS THE BUCKET BACK ANGLE AND HOW DOES IT AFFECT BUCKET PERFORMANCE?
Virnig V60 Utility Buckets have a 66 degree back angle. The bucket back angle affects the rollback and dump angles of a skid steer. If the angle on the back is too large the bucket may not roll back enough, and if there’s not enough back angle, the bucket may not dump properly. The higher or more vertical the back angle the more volume the bucket is able to hold.
Virnig Frequently Asked Questions
HOW DO I PURCHASE VIRNIG SKID STEER ATTACHMENTS?
Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?
Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.
DOES VIRNIG BUILD MINI-SKID STEER ATTACHMENTS?
All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.
WHAT IS RECOMMENDED LOADER CAPACITY?
Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.
Go here to find skid steer capacity and specs for 2015 models.
Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.
WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?
Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.
WHAT IS THE SETUP TIME FOR A VIRNIG SKID STEER ATTACHMENT?
Most Virnig attachments are ready to work right off the pallet.
To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
HOW QUICKLY CAN I GET REPLACEMENT PARTS?
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
WHAT WARRANTY DOES VIRNIG OFFER?
Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.