Agriculture

Feed Pusher

FEED PUSHER

Feed Pusher

Multiple width and angle adjustments with a replaceable rubber edge.

  • Five width adjustments keeps feed away from tires.
  • Eight angle adjustments keeps feed moving efficiently.
  • 1 ½” x 10” reversible, replaceable rubber edge allows 6” of total wear.
No matching reviews found.

WARNING

Specs
Compare
FAQ
Downloads
Options
MODELFPV
Minimum Angle (Degrees)38.4
Maximum Angle (Degrees)71.7
Minimum Push Width (Inches)30.1
Maximum Push Width (Inches)75.2
Minimum Discharge Distance (Inches) (Measured from Center Line of Loader)48.7
Maximum Discharge Distance (Inches) (Measured from Center Line of Loader)66.0
Blade height (Inches)20.0
Blade Length (Inches)96.0
Approximate Weight (Pounds)520

This is a specialized attachment, no direct comparisons available.

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

Feed Pusher Frequently Asked Questions

WHY DOES VIRNIG USE A RUBBER EDGE INSTEAD OF STEEL OR POLY EDGES?

Rubber is effective at scraping clean paths on uneven ground so feed doesn’t get run over. Additionally, rubber dampens vibrations, is gentle on concrete, and will not rust.

IS THE ANGLE OF THE FEED PUSHER EDGE REVERSIBLE?

No, the Feed Pusher angle is adjustable but not reversible.

HOW MANY POINTS OF ADJUSTMENT DOES THE VIRNIG FEED PUSHER HAVE?

Five width adjustments keep feed away from the tires. Eight angle adjustments allow efficient movement of feed.

HOW EASY IS IT TO ADJUST THE VIRNIG FEED PUSHER?

Virnig uses a simple hitch pin and sliding shaft system with three hinge points for angle adjustment and a simple two-bolt system for push width adjustment. To adjust angle, simply pull out the pin, extend the shaft to the desired angle, and re-insert the pin. To adjust the push width, remove both bolts and adjust the desired amount and re-install the bolts.

Virnig Frequently Asked Questions

HOW DO I PURCHASE VIRNIG SKID STEER ATTACHMENTS?

Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?

Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.

DOES VIRNIG BUILD MINI-SKID STEER ATTACHMENTS?

All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.

WHAT IS RECOMMENDED LOADER CAPACITY?

Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.

Go here to find skid steer capacity and specs for 2015 models.

Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.

WHAT IS THE SETUP TIME FOR A VIRNIG SKID STEER ATTACHMENT?

Most Virnig attachments are ready to work right off the pallet.

To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

None Available.