Dozer Blade – 6 Way

DOZER BLADE

Images

Dozer Blade – 6 Way

Product Category: Skid Steer

Heavy-duty frame, 3/8″ thick moldboard and adjustable skid shoes.

  • ANGLE THE BLADE 30° LEFT OR RIGHT & TILT 10° FROM INSIDE THE CAB
  • NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
  • 5/8″ x 8″ REVERSIBLE STEEL BOLT-ON EDGE

NOTE: Does not have a trip edge or trip moldboard.

Download Spec Sheet (PDF)
Download Manual >>

WARNING

Specs
Compare
FAQ
Downloads
Options
MODEL DZR72 DZR84 DZR96
Overall Width (Inches) 74.0 86.0 98.0
Height: Overall / Blade 28.1 / 25.8
Overall Depth (Inches) 38.0
Blade Angle (Degrees) (+/-) 30
Width at Full Angle (Inches) 64.1 74.5 84.9
Blade Oscillation (Degrees) (+/-) 10
Moldboard Thickness (Inches) 0.375
Cutting Edge (Inches) 5/8 x 8 Bolt-on
Cylinder Bore / Stroke (Inches) 3.5 / 8.0
Pins: Cylinder / Hinge / Oscillation (Inches) 1.563 / 2.125 / 2.125
Approximate Weight (Pounds) 1510 1575 1640
Recommended Loader Capacity Greater than 1800 pounds

 

This is a specialized attachment, no direct comparisons available.

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

Dozer Blade Frequently Asked Questions

WHAT BLADE WIDTH SHOULD I PURCHASE?

At minimum, the Blade Width at Full Angle should be wider than your loader’s tracks or tires. Please refer to the spec table to see which models work for your skid steer.

WHAT MAKES THE VIRNIG DOZER BLADE HEAVIER THAN THE COMPETITION?

Virnig uses thicker steel on the moldboard, the heaviest cylinders Virnig offers, a thicker cutting edge, and more welds and gusseting than most comparable models.

CAN I USE THE VIRNIG DOZER BLADE TO PLOW SNOW?

The Virnig Dozer Blade is not designed to plow snow effectively. The Dozer Blade is not equipped with a trip edge system or a floating frame link and oscillation. Without a trip edge, anything the Dozer Blade impacts could cause damage to the attachment, skid steer, or injure the operator. With no floating frame link and oscillation, it would be very difficult to maintain contact with the ground while plowing.

WILL MY WHEELED SKID STEER WORK WITH THE VIRNIG DOZER BLADE?

A wheeled skid steer will work with the Dozer Blade, but it won’t be as effective as using a skid steer with tracks or rubber over-the-tire tracks. Tracks will allow the skid steer to float better and maintain a level work area. Tires will likely sink in soft spots and make the terrain more difficult to grade.

Virnig Frequently Asked Questions

What is Recommended Loader Capacity?

Virnig attachments are rated to provide maximum performance and protection against damage when paired with an appropriately sized loader. Here’s a checklist to get the right attachment for your loader.

Go here to find skid steer capacity and specs.

Contact a local Virnig dealer for the most accurate attachment specs, or call Virnig at 800.648.2408.

How Do I Purchase Virnig Attachments?

Virnig sells mini skid steer, compact tractor, and skid steer attachments through a network of independently owned dealers throughout the United States and Canada. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

What Type of Attachment Interface/Hookup Does Virnig Use?

All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.

All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.

What is the Setup Time for a Virnig Attachment?

Most Virnig attachments are ready to work right off the pallet.

To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

None Available.

View Similar Products