| MODEL |
BG54 |
BG72 |
BG84 |
| Overall Width (Inches) |
56.0 |
74.0 |
86.0 |
| Height: Overall / Bucket (Inches) |
57.5 / 30.5 |
| Overall Depth (Inches) |
40.8 |
| Number Of Bucket Tines (With Sides) |
3 |
5 |
6 |
| Space Between Tines (Inches) |
26.5 |
17.5 |
16.3 |
| Bucket Tine Thickness (Inches) |
0.5* |
| Number of Grapple Teeth |
3 |
4 |
4 |
| Space Between Grapple Teeth (Inches) |
20.0 |
19.3 |
19.3 |
| Grapple Jaw Opening (Inches) |
73.4 |
| Cylinder Bore / Stroke (Inches) |
2.0 / 8.375 |
| Cylinder Pins / Hinge Pins Diameter (Inches) |
1.25 / 1.563 |
| Approximate Weight (Pounds) |
900 |
1050 |
1150 |
| Recommended loader capacity |
Greater than 2400 pounds |
*Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength).
Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
Big Bale Grapple Frequently Asked Questions
WHAT TYPES OF BALES IS THE BIG BALE GRAPPLE DESIGNED FOR?
The Big Bale Grapple is designed to effectively handle and transport large, loose round bales. It can also be used to handle scrap, brush and many other jobs suited to a skeleton grapple. The Big Bale Grapple can be used with twine or net wrapping but should not be used with plastic wrap to prevent tearing.
HOW MANY HAY BALES CAN THE GRAPPLE PICK UP AT ONCE?
Virnig Hay Grapples are designed to pick up one round bale at a time. Attempting to load more than one bale at a time can overload your machine and cause performance issues, as well as tipping dangers.
WHY ARE THE TEETH ON THE GRAPPLE JAW CURVED?
The teeth are curved at in a way that allows them to penetrate the bale for transport and slide back out the same hole when done. This keeps the bale material intact and limits damage to the bale.
WHAT GRAPPLE WIDTH SHOULD I PURCHASE?
Typically, the grapple bucket width should be larger than the width of the skid steer.
When loading bales, it is possible to overload the skid steer when using a grapple that is too large. Always reference grapple recommended loader capacity before ordering.
If you are unsure about what width to purchase, contact a local Virnig dealer dealer or call Virnig at 800-648-2408.
WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?
Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.
ARE HOSES INCLUDED WITH THIS GRAPPLE?
The hoses, couplers*, cylinders, and fittings are included with all Virnig skid steer grapples.
*Couplers not included with Compact Tractor grapples.
Virnig Frequently Asked Questions
HOW DO I PURCHASE VIRNIG ATTACHMENTS?
Virnig sells mini skid steer, compact tractor, and skid steer attachments through a network of independently owned dealers throughout the United States and Canada. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?
All Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. The mounting frame is built to ISO 24410 and SAE J2513 standards.
All Virnig mini skid steer attachments are manufactured with a Toro®/mini universal mount, Bobcat® mount, or ASV® mount.
WHAT IS THE SETUP TIME FOR A VIRNIG ATTACHMENT?
Most Virnig attachments are ready to work right off the pallet.
To minimize setup time, Virnig Manufacturing requires the machine brand and model to be listed in every order for attachments with hydraulic components. This ensures proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
HOW QUICKLY CAN I GET REPLACEMENT PARTS?
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
WHAT WARRANTY DOES VIRNIG OFFER?
All Virnig parts and attachments are warranted for one year from the end user’s date of purchase, or the dealer’s date of first rental/demonstration. If the warranty period has expired, a sales receipt or first rental slip will be required for warranty consideration.
WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?
Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice. Learn more about the benefits of the NitroSteel® process.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.
