Snow Removal

V60 Angle Snow Blade

V60 ANGLE SNOW BLADE

Videos

Images

V60 Angle Snow Blade

  • Commercial-grade skid steer snow plow designed to hug the contours of the ground for effortless snow removal.
  • Two-cylinder hydraulic design allows the blade to angle +/- 30° in either direction to efficiently windrow snow.
  • Designed to maintain full down pressure to help cleanly scrape hard-pack snow and ice.
  • Side-to-side oscillation allows the cutting edge to follow the contour of the surface.
  • Hydraulic crossover relief valve protects the attachment by absorbing shock and angling the entire blade if a curb or other object is struck.
  • Corrosion, dent, and flake resistant NitroSteel® cylinder rods are more salt resistant than chrome.
  • Trip edge containing four compression springs and hinge points.
  • ⅝” x 8ˮ steel bolt-on edge allows 5 ½” of total wear and can quickly be reversed or replaced.
  • V50 Angle Snow Blade also available.

Download Snow Removal Attachments eBook

WARNING

Specs
Compare
FAQ
Downloads
Options
MODELSBS72SBS84SBS96SBS108SBS120
Overall Blade Width (Inches)74.086.098.0110.0120.0
Blade Height (Inches)31.0
Blade Angle (Degrees)+/- 30
Width at Full Angle (Inches)64.074.084.095.0104.0
Moldboard Thickness (Inches)0.19
Cutting Edge (Inches)5/8 x 8 Bolt-on
Blade Oscillation (Degrees)+/- 4
Approximate Weight (Pounds)10201075113011851225
Recommended Loader CapacityGreater than 1500 pounds

 

Spec Comparisons - Virnig Snow Blades

Easily compare V60 Angle Snow Blades (SBS), V50 Angle Snow Blades (SBS-LD), and V60 V-Snow Blades (SBV).

Name (Model)         WidthHeightWidth at Full Angle# of SpringsCylindersPositions PossibleWeight (lbs)Rec. Loader Capacity (lbs)
V60 Angle Snow Blade (SBS72)74.0"31.0"64.0"423990> 1,500
V60 Angle Snow Blade (SBS84)86.0"31.0"74.0"4231050> 1,500
V60 Angle Snow Blade (SBS96)98.0"31.0"84.0"4231110> 1,500
V60 Angle Snow Blade (SBS108)110.0"31.0"95.0"4231170> 1,500
V60 Angle Snow Blade (SBS120)120.0"31.0"104.0"4231230> 1,500
V50 Angle Snow Blade (SBS60-LD)62.0"31.0"54.0"213800< 1,800
V50 Angle Snow Blade (SBS72-LD)74.0"31.0"64.0"213850< 1,800
V50 Angle Snow Blade (SBS84-LD)86.0"31.0"74.0"213900< 1,800
V50 Angle Snow Blade (SBS96-LD)98.0"31.0"84.0"213950< 1,800
V60 V-Snow Blade (SBV48)51.5"31.0"44.0"2251060> 1,500
V60 V-Snow Blade (SBV60)62.0"31.0"53.0"4251070> 1,500
V60 V-Snow Blade (SBV72)74.0"31.0"64.0"4251130> 1,500
V60 V-Snow Blade (SBV84)86.0"31.0"74.0"4251190> 1,500
V60 V-Snow Blade (SBV96)98.0"31.0"84.0"4251250> 1,500
V60 V-Snow Blade (SBV108)110.0"31.0"95.0"4251310> 1,500
V60 V-Snow Blade (SBV120)120.0"31.0"104.0"4251370> 1,500
V60 Hydraulic Snow Blade/Pusher (HSBP120)124.5"31.0"110.0"34Infinite1590> 1,800
V60 Hydraulic Snow Blade/Pusher (HSBP132)136.5"31.0"120.5"34Infinite1650> 1,800
V60 Hydraulic Snow Blade/Pusher (HSBP144)148.5"31.0"131.0"34Infinite1710> 1,800
V60 Hydraulic Snow Blade/Pusher (HSBP156)160.5"31.0"141.5"34Infinite1770> 1,800

Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.

V60 Angle Snow Blade Frequently Asked Questions

WHAT WIDTH SHOULD I PURCHASE?

At minimum, the V60 Angle Snow Blade Width at Full Angle should be wider than your loader’s tracks. Please refer to the spec table to see which models work for your skid steer.

WHY DOES VIRNIG USE A TRIP EDGE INSTEAD OF THE ENTIRE BLADE?

With full blade trip, when hitting a short obstacle such as a manhole cover or curb, the entire blade will roll over. Small objects will cause the skid steer to slow down and could make plowing much more disruptive. Virnig uses trip-edges with a rigid moldboard to minimize these plowing interruptions and provide safety. Virnig V60 Angle Snow Blades are designed to trip in all positions.

HOW DO I KEEP THE CUTTING EDGE FROM TRIPPING ON GRAVEL OR DIRT?

Because trip edge integrity is determined by down pressure, it is difficult to properly use your plow on unpacked dirt or gravel without destroying the surface. By using the machine tilt and arms to keep the blade slightly above the ground, you will build a base of hard packed snow and ice. Once the hard pack is set, down pressure may be applied. This is the most effective method to keep the edge from tripping.

When plowing on asphalt or concrete, raise or remove the plow shoes so the cutting edge will scrape as close to the surface as possible.

CAN I ADJUST THE TRIP EDGE TENSION OR CAN IT BE LOCKED OUT?

The tension is set by the springs and are non-adjustable. The edge cannot be locked out because if an object is hit hard enough the edge is designed to trip. Locking out the trip edge could damage the attachment, the skid steer, or worse the operator. Locking out the trip edge should never be done.

HOW DOES THE VIRNIG V60 ANGLE SNOW BLADE OSCILLATION WORK?

The knuckle plate is connected to the quick tach plate by a large pin that gives the V60 Angle Snow Blade +/- 4 degrees of rotational oscillation. This system allows the Angle Snow Blade to travel across uneven areas and still maintain solid contact with the ground.

WHAT IS THE BENEFIT OF HAVING A BLADE WITH TWO HYDRAULIC CYLINDERS?

With two cylinders it will take more external force to change the angle of the blade. This means the plow will hold its angle better when plowing heavy snow.

WHAT MAKES A VIRNIG SKID STEER V60 SNOW BLADE MORE DURABLE THAN ITS COMPETITION?

Virnig generally uses heavier cylinders, thicker moldboard steel, larger and thicker cutting edges, and built with more structural support.

CAN I USE THE VIRNIG V60 ANGLE SNOW BLADE TO DOZE/GRADE DIRT?

No. Virnig recommends that you should never use it on anything other than snow.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® cylinder rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.

Virnig Frequently Asked Questions

HOW DO I PURCHASE VIRNIG SKID STEER ATTACHMENTS?

Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.

WHERE CAN I FIND PRICING INFORMATION?

Please contact a local Virnig dealer to obtain pricing information.

For Virnig’s suggested retail price, fill out an online Request a Quote form.

WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?

Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.

DOES VIRNIG BUILD MINI-SKID STEER ATTACHMENTS?

All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.

WHAT IS RECOMMENDED LOADER CAPACITY?

Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.

Go here to find skid steer capacity and specs for 2015 models.

Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.

WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?

Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.

Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.

A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.

WHAT IS THE SETUP TIME FOR A VIRNIG SKID STEER ATTACHMENT?

Most Virnig attachments are ready to work right off the pallet.

To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.

HOW QUICKLY CAN I GET REPLACEMENT PARTS?

Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.

Check with a local Virnig dealer for replacement part availability.

WHAT WARRANTY DOES VIRNIG OFFER?

Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.

The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.

Pin-on Wings

  • Two, 12” wide wings angled 20° forward from moldboard to increase the blade’s width by 21 3⁄4”.
  • Retro Pin-on Wings available for Angle Snow Blades without factory added mounting holes.
Pin-On-Wing-Option-Snow-Blade

Poly Edge

  • 1” x 7 3⁄4” reprocessed UHMW (Ultra High Molecular Weight Polyethylene) allows 5 1⁄4” of total wear.
  • Reversible and replaceable like a steel bolt-on edge.
Poly-Edge-Option-Skid-Steer-Snow-Plow

Rubber Edge

  • 1 1/2” x 10” reversible, replaceable rubber edge allows 7” of total wear.

View Similar Products