|Overall Bucket Width (Inches)
|Bucket Depth (Inches)
|Bucket Height (Inches)
|Number of Tines (With Sides)
|Space Between Tines (Inches)
|Bucket Tine Thickness (Inches)
|Approximate Weight (Pounds)
|Recommended loader capacity
||Less than 2400 pounds
*Tine Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
Below are various questions Virnig Manufacturing receives on a regular basis. Browse through the following questions and click on a question to see the answer. If you do not see your question listed below please contact a local Virnig dealer or call 800.648.2408.
V40 Skeleton Rock Bucket Frequently Asked Questions
WHAT IS THE DIFFERENCE BETWEEN THE V30, V40, V50, AND V60 SKELETON ROCK BUCKETS?
See the comparison chart under the “Compare” tab.
WHAT WIDTH SHOULD I PURCHASE?
Typically, the bucket width should be larger than the width of the skid steer.
Dense items like rocks may overload the skid steer when using a large width V40 Skeleton Rock Bucket. Always reference recommended loader capacity before ordering.
If you are unsure about what width to purchase, call your local dealer or contact Virnig at 800-648-2408.
WHAT MAKES A VIRNIG V40 ROCK BUCKET UNIQUE?
What makes it unique is:
- The first skeleton rock bucket design originated from Virnig Manufacturing in the early 2000’s.
- The shortened bucket height allows the cutting edge to remain visible to the operator.
- The recessed load area behind the rock dam better cradles rocks so they stay in the bucket during transport.
- The V40 Rock Bucket is constructed with high-strength, ⅜” thick Grade 50 steel (50,000 PSI yield strength).
- The increased visibility provided by the open, skeletal back ensures that fence posts or other damaging debris won’t easily go unnoticed and puncture a tire.
- The unique safety step is made of durable, laser cut steel in an aggressive pattern that will grip in the worst conditions.
Virnig Frequently Asked Questions
HOW DO I PURCHASE VIRNIG SKID STEER ATTACHMENTS?
Virnig sells skid steer attachments through a network of independently owned dealers. Call 800-648-2408 for assistance in finding a dealer or use the online Dealer Finder.
WHAT TYPE OF ATTACHMENT INTERFACE/HOOKUP DOES VIRNIG USE?
Virnig skid steer attachments are manufactured with a universal mount to fit most skid steer loaders. Mounting frame is built to ISO 24410 and SAE J2513 standards.
DOES VIRNIG BUILD MINI-SKID STEER ATTACHMENTS?
All attachments have a universal skid steer mount. Use the recommended loader capacity listed per attachment to determine if it is properly sized for the machine in question.
WHAT IS RECOMMENDED LOADER CAPACITY?
Virnig skid steer attachments are rated to provide maximum performance and protection from damage when used with an appropriately sized skid loader.
Go here to find skid steer capacity and specs for 2015 models.
Contact a local Virnig dealer for the most accurate specs, or contact Virnig at 800.648.2408.
WHY DOES VIRNIG USE NITROSTEEL® CYLINDER RODS?
Virnig uses NitroSteel® rods because they are a superior performing alternative to chrome plating. The finish offers improved corrosion resistance and better grease retention.
Chrome plated cylinder rods can flake or pit and destroy the seals or other internal components; resulting in downtime and expensive repairs.
A NitroSteel® rod will perform better and increase the service life of a cylinder, making it the cost-effective choice.
WHAT IS THE SETUP TIME FOR A VIRNIG SKID STEER ATTACHMENT?
Most Virnig attachments are ready to work right off the pallet.
To minimize set up time, Virnig Manufacturing requires the machine brand and model to be listed on each order for attachments with hydraulic components to ensure proper hose length, routing, and coupler sizing. In addition, all hydraulic Virnig Attachments are tested for leaks and proper operation before leaving the factory. There may be specific scenarios in which additional setup time will be required.
HOW QUICKLY CAN I GET REPLACEMENT PARTS?
Most parts for Virnig skid steer attachments are available in-stock and can be shipped as early as the same day the order is received. Fabricated and back ordered parts are available with a reasonable lead time. Virnig uses several shipping options to provide timely and cost effective delivery to customers.
Check with a local Virnig dealer for replacement part availability.
WHAT WARRANTY DOES VIRNIG OFFER?
Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase.
The questions and answers in this FAQ are provided for general information purposes only and may not be completely accurate in every circumstance, view full details. This FAQ is subject to change without notice.